Everyone knows a second pane keeps a house warmer. Fewer people know why.
A double glazed window looks simple: two panes of glass in a frame. The way it works is cleverer than it looks. The gap between the panes, the gas inside it, the spacer at the edge and an invisible coating on the glass all play a part. Get each one right and the window keeps heat in, keeps the glass warmer and keeps out some noise. Get one wrong and the performance drops. We manufacture bespoke timber windows, double glazed as standard with low-E glass, argon and warm edge spacers. This guide explains the technology in plain English, so you can compare windows properly and ask the right questions.
Double glazed as standard
Low-E glass and argon
Warm edge spacers
U-value 1.4 W/m²K
Triple glazing on request
In this guide
What You’ll Discover in This Article
- What’s inside a double glazed window
- How the gap, the gas and the edge details reduce heat loss
- What Low-E coatings do and why they matter
- What U-values mean and how to compare windows
- Why condensation happens, and when triple glazing is worth it
01 · Inside the unit
Inside a Double Glazed Window
A modern sealed unit, or insulated glass unit, has a handful of parts. Each one does a specific job.
Two panes of glass
The heart of it is two panes of glass separated by a sealed gap. The outer pane faces the weather, and each pane of glass is usually ordinary float glass, sometimes toughened or laminated where safety or security matters. Our guide to window glass types explains the options.
The gap between them
The gap is what makes it work. That’s the whole trick. A single pane of glass loses heat quickly because glass conducts heat well. Add a second pane of glass with a layer of gas between, and the two glass panes slow that down a great deal. Thicker glass alone doesn’t do the same job. The gap has to be the right width, though. Too narrow and heat crosses easily; too wide and the gas starts to circulate.
The spacer bar
The spacer bar runs round the edge and holds the panes at the right distance. Older units used aluminium spacers, which conduct heat and leave a cold strip round the edge of the glass. Modern warm edge spacers use materials that conduct far less. That keeps the edge warmer and helps stop moisture forming there.
The edge seal
Round the outside sits the seal. It keeps the gas in and moisture out. When a seal fails, the glass unit mists up between the panes. Our guide to window seals on wooden windows covers seals in more detail.

Argon gas in the gap
The gap in a modern unit is usually filled with argon gas rather than air. Argon is inert, non-toxic and naturally present in the air we breathe. It conducts heat roughly a third less readily than air, so an argon-filled gap insulates better. Krypton insulates better still but costs considerably more, and vacuum glazing is an emerging option. Neither is common in homes yet. The gas does leak, but very slowly; a good seal keeps the loss small.
02 · Heat loss
How Double Glazing Reduces Heat Loss
Heat leaves a room through a window in three ways. A good unit tackles all three.
Conduction
Conduction is heat passing straight through a material. Glass is a fairly good conductor, which is why a single glazed window feels cold to the touch. Older windows could lose heat fast. The gas-filled gap breaks that path, because gas conducts heat far less than glass.
Convection
Inside the gap, warm gas rises against the inner pane and cool gas falls against the outer one. That movement carries heat across. Getting the gap width right keeps the movement small, so the unit loses less heat this way.
Radiation
Warm objects give off infrared heat. Ordinary glass lets much of it escape. That’s the third route out. This is where Low-E coatings come in, and they’re covered below. Together, the gap and the coating significantly reduce heat transfer through the glass.
03 · Low-E
Low-E Coatings: Reflecting Heat Back
What Low-E means
Low-E stands for low emissivity. It’s a microscopically thin metallic coating on one layer of glass. You can’t see it, but it reflects heat back into the room while letting daylight through.
Why it makes such a difference
Without the coating, the glass absorbs heat from the room and loses much of it outside. With it, more of that heat stays where you want it. The inner pane of glass stays warmer too, which makes the room feel more comfortable near the window. It gives better insulation without darkening the room, and improves thermal insulation across the whole of the window panes.
Hard coat and soft coat
There are two kinds. Hard coat is applied while the glass is made and is very durable. Soft coat is applied afterwards in a vacuum chamber and usually performs better, so it’s placed inside the unit where it’s protected.
04 · U-values
U-Values: The Numbers That Matter
A U-value measures how fast heat passes through a window. The lower the number, the better the insulation.
Centre-pane or whole window?
Glass makers often quote a centre-pane figure, which covers the glass alone. The whole-window U-value includes the frame and edges, so it’s always higher. That’s the figure that counts for building regulations, and the one to compare. Always compare like with like.
What the regulations require
In England, Approved Document L sets a limit of 1.4 W/m²K for replacement windows, or an equivalent window energy rating. Our windows reach a whole-window U-value of 1.4 W/m²K as standard.
How the options compare
Here’s how the main configurations compare in broad terms.
| Configuration | Relative heat loss |
|---|---|
| Single glazing | Highest; typically around 5 W/m²K |
| Double, air-filled | Much lower |
| Double, argon and Low-E | Lower again; modern standard |
| Triple, argon and Low-E | Lowest, with diminishing returns |
Installing double glazing in place of single gives the biggest jump. The step from good double to triple is smaller.
05 · Condensation
Condensation, Noise and Comfort
Condensation on the inside
Condensation forms when warm air carrying moisture meets a cold surface. With one pane, the glass is nearly as cold as outside, so condensation in winter is common. A sealed unit keeps the internal pane of glass much warmer, which can reduce condensation. If you still see it on the inside, the room is usually very humid, and better ventilation is the fix.
Condensation between the panes
Misting between the panes is different. It means the seal has failed and moisture has got into the unit. The unit needs replacing, but the frame usually doesn’t.
Noise
A standard unit can help reduce noise from outside too, though it isn’t designed for it. Acoustic glass does more. It uses different thicknesses of glass for better sound insulation, and it’s available on request for homes near busy roads. Secondary glazing, a separate inner window, is another option on listed homes.
Energy and comfort
Warmer glass means fewer cold draughts and more usable space near the window. Better glazing also improves your home’s energy efficiency. New double-glazed windows are one of the most noticeable upgrades in an older house. The Energy Saving Trust explains the energy savings from better glazing in more detail.

06 · Triple and frame
Triple Glazing and the Frame
When triple glazing is worth it
Triple glazing adds a third pane and a second gap. It improves insulation further, but the gain is smaller than the move from single to double. It suits exposed sites, north-facing rooms and very low-energy builds. For most UK homes, a good double unit gives the best balance. Most don’t need triple. It’s available on request.
Why the frame matters
The glass is only part of the window. A window frame that conducts heat undermines a good unit. The same units go into sash and casement windows alike. Timber is a natural insulator with no metal running through it, which is why double glazed wooden windows perform well as a whole. Timber frames help make the whole window energy efficient.

07 · Example project
Example Project: Oxford, Victorian Villa
This is an illustrative example based on a typical order of this kind, not a named customer. The owners of a Victorian villa in Oxford still have their original single-pane sashes. They want new windows that keep the period look. The rooms are cold near the windows, and there’s condensation on the glass every winter morning.
Specification:
- 9 bespoke sash windows on hidden springs in engineered pine
- Low-E glass, argon and warm edge spacers
- Slim glazing bars to keep the Victorian look
- Factory finish in a Farrow & Ball white
- Full set of standard ironmongery
Project numbers:
- Joinery supply cost: around £6,300
- Manufacturing time: around 20 working days
- Delivery: arranged once manufacturing is complete
- Client’s installer: FENSA-registered joiner
- U-value: 1.4 W/m²K (whole window)
Moving from one pane to two is where the biggest improvement comes from. The owners can also expect a lot less moisture on the glass, as long as the rooms are reasonably ventilated.
Frequently Asked Questions
How does double glazing work?
–
+
Two panes of glass are separated by a sealed gap filled with argon gas. The gap slows heat loss by conduction and convection, and a Low-E coating reflects heat back into the room.
Why do my windows have condensation?
–
+
On the inside surface, it usually means the room is humid; better ventilation helps. Between the panes, it means the seal has failed and the unit needs replacing.
Can the glass be replaced without replacing the frame?
–
+
Usually, yes. A failed glazed unit can normally be replaced by a glazier or joiner while the frame stays in place.
Is triple glazing worth it?
–
+
For most UK homes, good double glazing gives the best balance of cost and performance. Triple glazing suits exposed sites and very low-energy homes, and it’s available on request.
What U-value do your windows achieve?
–
+
Our windows reach a whole-window U-value of 1.4 W/m²K as standard, with low-E glass, argon and warm edge spacers.
Summary
Conclusion: Simple Idea, Careful Detail
A sealed unit traps gas between the panes, seals the edges and adds a coating that reflects heat. Each part matters: the gap, the gas, the spacer, the seal and the frame around them. Choose windows where all five are right and you’ll notice the difference every winter.
We make bespoke timber windows double glazed as standard, with triple and acoustic glass on request.
Request a free quote today and send us your sizes. We’ll reply within 48 hours.











